Nokia IP60 - Security Appliance, User Manual

Page: 223 / 494

Viewing Computers
Chapter 11: Viewing Reports 223
The
My Computers
page appears.
If you configured High Availability, both the master and backup appliances are shown. If you
configured OfficeMode, the OfficeMode network is shown.
If there are wireless networks, the wireless stations are shown under the network to which they are
connected. For information on viewing statistics for these computers, see
Viewing Wireless Statistics
on page 226. If a wireless station has been blocked from accessing the Internet through the IP60
appliance, the reason why it was blocked is shown in red.
If a network is bridged, the bridge's name appears in parentheses next to the network's name.
If you are exceeding the maximum number of computers allowed by your license, a warning message
appears, and the computers over the node limit are marked in red. These computers are still protected,
but they are blocked from accessing the Internet through the IP60 appliance.
Note:
Computers that did not communicate through the firewall are not counted for
node limit purposes, even though they are protected by the firewall and appear in
the
My Computers
table.
Note:
To increase the number of computers allowed by your license, you can
upgrade your product. For further information, see Upgrading Your Software
Product on page 423.
If Secure HotSpot is enabled for some networks, each computer's HotSpot status is displayed next to it.
The possible statuses include:
Authenticated.
The computer is logged on to My HotSpot.
Not Authenticated.
The computer is not logged on to My HotSpot.
Excluded from HotSpot.
The computer is in an IP address range excluded from HotSpot
enforcement. To enforce HotSpot, you must edit the network object. See Adding and Editing
Network Objects on page 135.