Instructions Manual
101
8. Practical Guide
ENGLISH
The following are the most common symptoms of operation failures, their
probable causes and the precautions that should be taken by the user. If you
have any questions, consult your dealer or contact our technical assistance.
8.- FAULTS AND SOLUTIONS
The machine is getting clogged.
Probable cause
Solution
Excessive volume of gathered crop.
Turn off the tractor and turn the cardan
shaft on the machine rear in reverse,
expelling excess of crop.
Excessive traveling speed.
Reduce speed.
Incorrect quantity of rotor knives.
Install the correct quantity of rotor
knives.
Incorrect mounting of rotor knives.
Adjust the correct distribution of knives.
Dull rotor knives.
Sharpen the knives.
Dull rotor counter knife.
Turn over the counter knife or replace it.
Weak releasing of chopped crop by the chute.
Probable cause
Solution
Tractor below the minimum
recommended power.
Use a tractor with the recommended
power.
.
Incorrect quantity of rotor knives.
Install the correct quantity of rotor
knives.
Incorrect mounting of rotor
knives.
Install the correct quantity of rotor
knives.
Incorrect mounting of rotor knives.
Adjust the correct distribution of knives
.
Excessive cardan vibration.
Probable cause
Solution
Unbalanced cardan.
Check if the length adjustment was
performed properly.
Summary of Contents for FTN-1000 G3
