Nogueira FTN-1000 G3, Instruction Manual

Page: 157 / 224

Instructions Manual
45
4. Preparation
F
C
E
D
A
B
ENGLISH
ATTENTION!
Turn off the tractor and remove
the ignition key before starting
the following procedure.
The FTN-1000 G3 provides a variety of
chopping sizes, ranging from a minimum of
2.0 mm to a maximum of 36 mm in length.
The table below shows all possible chop sizes,
the gear pairs used, and the number of knives
needed to obtain these sizes.
How to change the chopped size:
1.
Remove the 3 bolts (A) and the cover (B);
2.
Loosen the tensioner bolt (C);
3.
Loosen and remove the chain (D);
4.
Remove the bolt (E) and the sprocket
wheel (F);
5.
Note in the table above which pair of gears
should be mounted to obtain the desired
chop size;
4.9 - Theoretical Length of Cut
CHOPPING LENGTH
CHOPPING
CHOPPING
CHANGE