Nogueira FTN-1000 G3, Instruction Manual

Page: 214 / 224

102
Instructions Manual
8. Practical Guide
Bad or uneven cut.
Probable cause Solution
Dull rotor knives. Sharpen the knives.
Worn rotor counter knife. Turn over the knife or replace it.
Rotor knives detached from
counter knife.
Adjust the spacing between knives
and counter knife.
Low production.
Probable cause Solution
Inconstant work speed.
Try to keep your work speed as
constant as possible.
Bad forage wagon transport
logistic or organization.
Organize the positioning and shifting
from forage wagons.
Inadequate tractor. Use a tractor with adequate power.
Improper ground for mechanized
harvesting.
Cultivate on proper ground.
The machine does not gather the crop.
Probable cause Solution
Broken safety pin(s). Replace the safety pin(s).
Tractor below the minimum
recommended power.
Use a tractor with the recommended
power.
Incorrect PTO speed. Use a speed of 540 rpm.