Nogueira FTN-1000 G3, Instruction Manual

Page: 186 / 224

74
Instructions Manual
6. Maintenance
E
D
F
H
K
ATTENTION!
Turn off the tractor and remove
the ignition key before starting
the following procedure.
1.
Remove the 4 bolts (D) and (E);
2.
Open the rotor cover (F);
3.
Remove the 3 bolts (H) that secure the
knife to the rotor disc (K);
4.
Remove the knife;
5.
Repeat the operation to remove the
remaining knives;
6.
Make sure the knives' bolts are in good
condition. If necessary, replace them as
well.
7.
Mount all new knives on the disc.
8.
Close the cover (F) and secure it with the
bolts (D) and (E).
The entire set of knives must be replaced
when there is wear, making it impossible to
sharpen and adjust with the counter knife.
6.5 - How to change the rotor knives
To keep the rotor balance, always
replace all knives. The unbalance will
cause vibrations and machine damage.
IMPORTANT!