Nogueira FTN-1000 G3, Instruction Manual

Page: 200 / 224

88
Instructions Manual
6. Maintenance
7.
Remove the bottom (R);
8.
Using the pin punch found in the
machine toolbox, remove the safety pin
(P) that is broken;
NOTE: the broken pin is located in the biggest
gear's shaft.
9.
Install a new safety pin;
10.
Using a compression punch, crimp
the pins’ ends so that they are tightly-
mounted;
11.
After changing the pin, replace the
bottom (R), the cutting gears, the
sprocket wheels (J) and (K) and the chain
(G);
12.
Stretch the chain (G);
13.
Replace the cover (E).
Be aware of the sprocket wheels
alignment. Observe the quantity and
position of the shim washers (T).
Replace them when mounting the
sprocket again.
Misaligned sprocket wheels damage
the chain and compromise the
machine.
IMPORTANT!
L
R
Conventional
Pin
Special
Pin
It has a hole in the tip
T
In addition to conventional pins,
5
special safety pins , more resistant,
are provided along with the machine.
If the safety pin is breaking easily, use
the special pins. In this case, replace
the two pins.
NOTE!
P
P