OPERATION
18
SpeedScrub Rider 331140 (9- 2013)
NOTE: When the alarm sounds and the light
blinks red, the machine will bypass the ec-H2O
system. To continue scrubbing, turn the ec-H2O
switch off and change over to conventional
scrubbing.
SOLUTION TANK EMPTY INDICATOR
The
solution tank empty indicator
comes on when
the solution tank is empty. When this happens,
the scrub functions are disabled. If necessary,
press the
ONE STEP Scrub button
for an
additional minute of operation to pick up standing
water or solution.
RECOVERY TANK FULL INDICATOR
The
recovery tank full indicator
comes on when
the recovery tank is full. When this happens, the
scrub functions are disabled. If necessary, press
the
ONE STEP Scrub button
for an additional
minute of operation to pick up standing water or
solution.
BATTERY DISCHARGE INDICATOR
The
battery discharge indicator
shows the charge
level of the batteries.
When the batteries are fully charged, all five lights
are lit. As the batteries discharge, the lights go out
until only the left light is blinking.
When the left light blinks, the scrubbing functions
will shut off to alert the operator of the battery
condition. The machine will still propel when the
light is blinking. Recharge the batteries when the
light blinks. If necessary, press the
ONE STEP
Scrub button
for an additional minute of operation
to pick up standing water or solution.
NOTE: Do not charge batteries more often than
necessary. Excessive charging could reduce the
life of the batteries. It is best to charge the
batteries only when the left light indicates that the
battery needs charging. See BATTERIES in the
MAINTENANCE section.
NOTE: The blinking left battery discharge light will
not reset from blinking until the batteries are fully
charged.
