MAINTENANCE
46
SpeedScrub Rider 331140 (9- 2013)
SKIRTS AND SEALS
DISK SCRUB HEAD FLOOR SKIRT
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, and remove key.
The skirt is located in front of the disc brush scrub
heads. Check the skirt for damage and wear after
every 50 hours of operation.
The skirts should clear the floor by 0 to 6 mm
(0 to .25 in) when the scrub brushes are new and
the scrub head is down.
RECOVERY TANK SEAL
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, and remove key.
The recovery tank seal is located on the bottom of
the recovery tank cover. Check the seal for
damage and wear after every 100 hours of
operation.
SOLUTION TANK SEALS
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, and remove key.
There are two solution tank seals. Check the seal
for damage and wear after every 100 hours of
operation.
A front seal is located on the bottom of the
solution tank cover. A rear seal is located on the
bottom of the recovery tank.
TIRES
FOR SAFETY: Before leaving or servicing
machine, stop on level surface, turn off
machine, and remove key.
The machine has three solid rubber tires: one tire
is front and two are in the rear. Check the tires for
damage and wear after every 500 hours of
operation.