OPERATION
8
SpeedScrub Rider 331140 (03- 2015)
ec-H2O
NanoClean SCRUBBING SYSTEM
(
ec-H2O
Model)
When using the ec-H2O NanoClean technology,
normal water passes through a module where it is
electrically converted into a cleaning solution. The
electrically converted water attacks the dirt,
allowing the machine to easily scrub away the
suspended soil. The converted water then returns
to normal water in the recovery tank.
The
ec- H2O
system can be used with all double
scrubbing applications.
NOTE: Do not enable the ec- H2O system with
conventional cleaning detergents in the solution
tank. Drain, raise and refill the solution tank with
clear cool water only before operating the
ec- H2O system. Conventional cleaning
detergents/ restorers may cause failure to the
ec- H2O solution system.
BRUSH INFORMATION
For best results, use the correct brush type for the
cleaning application. The following are
recommended brush applications.
Non-scuff polypropylene brush (Cylindrical
and Disk)
- This brush uses a softer, general
purpose polypropylene bristle to lift lightly
compacted soilage without scuffing high-gloss
coated floors.
Nylon brush (Cylindrical and Disk)
- Softer
nylon bristles are recommended for scrubbing
coated floors. Cleans without scuffing
Super abrasive bristle brush (Cylindrical and
Disk)
- Nylon fiber impregnated with abrasive grit
to remove stains and soilage. Strong action on
any surface. Performs well on buildup, grease, or
tire marks.
Surface preparation pad
- This maroon pad is
for very aggressive floor stripping.
Heavy duty stripping pad
- This black pad is for
stripping floors. Cuts through old heavy finishes
easier to prepare the floor for recoating.
Stripping pad
- This brown pad is for stripping
floors. Quickly and easily cuts through old finish to
prepare the floor for recoating.
Scrubbing pad
- This blue pad is for scrubbing
floors. Removes dirt, spills, and scuffs. Leaves a
clean surface ready for recoating.
Buffing pad
- This red pad is for buffing floors.
Quickly cleans and removes scuff marks while
polishing the floor to a high gloss.
Polishing pad
- This white pad is for polishing
floors. Maintains a high gloss. Use for buffing very
soft finishes and lower traffic areas, and polishing
soft waxes on wood floors.
