MAINTENANCE
34
SpeedScrub Rider 331140 (10- 2015)
5. Press the spring clip together with your thumb
and index finger. The brush/pad driver will
drop off the drive hub.
6. Set the yellow spring clip to the open position
to make brush installation easier. Press spring
clip together and downward to set.
7. Align the pad driver or brush under the motor
hub and push it upward to engage hub.
Ensure that it is securely mounted onto the
motor hub.
8. Close the side squeegee and the retainer
pivot, then insert the pin.
NOTE: Be sure the pin is inserted completely
through the bottom.
REPLACING DISK PADS
1. Remove the pad driver from the machine.
2. Squeeze the spring clip together to remove
the center disk.
3. Flip or replace the scrub pad, center the scrub
pad on the pad driver. Then reinstall the
center disk to secure the pad in place on the
pad driver.
4. Reinsert the pad driver into the machine.
