OPERATION
15
SpeedScrub Rider 331140 (9- 2013)
DOUBLE SCRUBBING
For heavily soiled areas, use the double scrubbing
method.
Double scrubbing can be performed using the
FaST SCRUBBING SYSTEM (option),
ec- H2O
SCRUBBING SYSTEM (option) or
CONVENTIONAL SCRUBBING methods.
Disk brushes: Before double scrubbing, remove
the side squeegees to keep them from channeling
water while double scrubbing. To remove the side
squeegees, lower the scrub head, then pull the
pins on the front and rear ends of the squeegees.
If the machine is equipped with the accessory
basket, you may hang the side squeegees from
the hooks.
To double scrub, press the
One Step Scrub
button
, then the
vacuum fan button.
The light
above the
vacuum fan button
will turn off, the
squeegee will raise and the vacuum fan will stop
operating. Then scrub the area.
Let the cleaning solution set on the floor for 3- 5
minutes.
Place the side squeegees back on to the machine
before scrubbing the floor the second time.
NOTE: It is easier to put the side squeegees
back on to the machine with the scrub head
partially lowered. This allows clearance to install
the pins.
Press the
vacuum fan button
again to lower the
squeegee and to turn on the vacuum fan. The
light above the
vacuum fan button
will come on.
Then scrub the floor a second time picking up the
cleaning solution.
WARNING: Flammable materials or
reactive metals can cause an explosion
or fire. Do not pick up.
