(Encoder Check)
This menu is for checking an encoder .
*Magnetic data writing test
ISO Track 1 : Writing to ISO Track 1
ISO Track 2 : Writing to ISO Track 2
ISO Track 3 : Writing to ISO Track 3
JIS2 : Writing to JIS2 Track
Clear key
: N/A
Exe key
: Action start
To write the data to track of which is set.
When ISO type encoder is set in printer display shows only ISO Track 1 or 2or 3.
******** showed end of data means Total No. of the printer has fed cards.
Writing da ta is as follows
(ISO Track 1)
ISO_TRACK_1_ENCODE_TEST._ARTLAND_COLOR_PRINTER_PR5350_
TOTAL_NO.____********
(ISO Track 2)
12345678901234567890123456789*******
(ISO Track 3)
1234567890123456789012345678901234567890123456789012345678901234567890
12345678901234567890123456********
(IC-R/W Check : To transport a card at IC-R/W position)
*Menu of Action to transport a card
IC-R/W Test : To check the action of card transported at IC -R/W position
Clear key : N/A
Exe key : start action
Once pressing EXE key a card is transported at IC -R/W position and stopped.
Pressing EXE key again the card is ejected from normal exit.