?
Mechanical Actuators
Consists of sensors and the motors to transport the cards.
1.3.2 Main Circuit Board
(
PBA-MAIN
)
There are CPU Block, Memory Block, Actuator Control Block.
Following items are the main components:
?
32 bit CPU
(
IC1
)
32 bit single chip micro processor, activated on the clock of 12.5 MHz
?
Flash Memory
(
IC8
)
A memory of 4 M bytes for storing the firmware.
It can be downloaded through the SCSI or USB interface.
?
SRAM
(
IC9
)
1 M byte memory to be used for cash memory of CPU
(
IC1
)
.
?
EEPROM
(
IC4
)
4K byte memory to record total frame number, number of errors, setting values of
the specific unit, etc.
?
Serial interface driver
(
IC33
)
Translated the signal of CPU to RS232C for communication with the built-in encoder
unit.
?
SDRAM
(
IC14
)
Memory of 16 M byte which stores the data of RGB +characters for 2 frames.
