2.2 Installation of the Encoder Unit
2.2.1 Installing steps
Step 1 Turn OFF the printer power source.
Step 2 Remove RIGHT -COVER.
(
Remove 2 x M-4 screws
)
Step 3 Take the screw off to take out a slide for a card rejected .
Step 4 Insert the ENCODER into the encoder space of the printer with connecting the
two harnesses from the printer.
Step 5 Fix the ENCODR with the screw of which was removed in Step3.
Step 6 Put the small Exsit Cover on the RIGHT -COVER with two screws.
The Exit Cover and two screws are supplied with ENCODER.
Step 7
Put the RIGHT-COVER back to the printer and fix with 2 x M-4 screws
Step 3
Step 4
Step 5
Step 6
