*
Adjustment for divergence between image and text.
Black shift Adj. : Adjustment for card transportation length for beginning point of
printing
Transportation length 0.1% ( + : increment length)
Clear key : Decrement Value (Min. value :-50)
Exe key : Increment Value (Max. value :50)
*Adjustment for uniformity of optical density
Uniformity Lower : Uniformity adjustment on lower area of a card
Uniformity Center : Uniformity adjustment on middle area of a card
Uniformity Upper : Uniformity adjustment on upper area of a card
Clear key : Decrement Value (Min. value :0)
Exe key : Increment Value (Max. value :9)
*Set the printing on right edge of a card
Data Cut Enable : Set the data cut function enable or disable when a printer detect
the right edge of a card
Clear key : N/A
Exe key : enable (ON) or disable (OFF)
Note: Use this Adjustment when there is difference on beginning
point of printing between color image and black text, and a
part or whole print area is overlapped.
Note: This menu is not for adjusting beginning point of printing.
Note: To increment value, an image will be lighter.
Note: Use this menu to make density even for three
area framed in blue line.
Note : This menu is not available to adjust the divergence of
density in direction of card transportation.
Note: Set this function enable if this function does not affect the
card design. Because ink ribbon might be cut out by heat
of print head when printing on out of a card.
