(
12
)
Card Jam in the Flip Turn Block
Card JAM F.Turn
Area 02 Er -
Ad
Er Ad Symptom
Check/Repair
43
**
Card jam error in the
Area02
(
SN2 or SN3
)
when
the card is transported
from
Feeder to Flip Turn. block
(
1
)
Check that the card is staying at the
problem area. If there is not a card,
go to
(
2b
)
The card has not reached at Cleaning
Roller,
there is possibility of feeder motor failure
on Feeder Block . Then see the Error Code
41 part.
(
2a
)
After removing the card, check the motion
of PM2 in the Actuator Check Mode.
If normal, clean the transport rollers in
the flip turn block and Cleaning
Roller then adjust the separation gate.
(
3a
)
If PM2 does not work normally, check
connection and electrical contact of the
harness.
·
ASM-MOTOR
(
4a
)
If the harness connection is normal,
replace the following:
·
PM2
·
PBA-MAIN
(
2b
)
Check reaction of SN2 and SN3 in the
Sensor
Check Mode.
(
3b
)
If SN2 or SN3 does not react, check
connection and electrical contact of the
harness.
ASM-SENSOR- B
(
4b
)
If the harness connection is normal,
replace the following:
·
SN2 or SN3
·
PBA- MAIN
