Actuator check (Activate the actuators individually )
This menu is for checking the actuators when troubles occur.
*Action of transferring Ink ribbon
Ribbon Mtr.(DM1) : Winding up the ink ribbon for limited time
HDRV : High speed action (100mm/s)(*)
LDRV : Low speed action (50mm/s)
Clear key : Quit action
Exe key : Start a ction
*the speed change to 50mm/s at 50mm before stopping.
*Action of head up/down
Headup Mtr.(DM1) : to move the print head to position set.
HOME : to move the print head to ready position
DOWN : to move the print head to print position
UP : to move the print head to the position where ink ribbon can
be changed
Clear key : stop
Exe key : start
*Action of supply roller
Pickup Mtr.(PM1) : activate a supply roller for limited time
HDRV : High speed (300mm/s)
Clear key : stop
Exe key : start
Note : Remove the card remained in the printer, otherwise it may cause
trouble.
Note : Must execute this menu in Ribbon put in the printer.
Note : Do not activate the platen roller at the print head is down position, otherwise
it may cause a print head and/or platen roller damaged.
Note : Must execute this menu without cards in the card hopper.
