(
9
)
Card Jam in the Card Feed Block
Card JAM. Feeder
Area 01 Er -
Ad
Er Ad Symptom
Check/Repair
40
**
Card does not arrive at
SN2 while feeding.
(
1
)
Check that the card is not arrived at the
SN2.
If it has arrived or passed through, go to
(
2b
)
.
(
2a
)
Check the motion of PM1 in the
Actuator
Check Mode. If the motion is normal, clean
the
feed rollers in the card feeding block and
adjust
the separation gate.
(
3a
)
If it does not work normally, check the
connection of harness.
·
ASM-MOTOR
(
4a
)
If the harness connection is normal,
replace
the following:
·
PM1
·
PBA-MAIN
(
2b
)
Check the reaction of SN2 in the
Sensor Check Mode.
(
3b
)
If SN2 does not react, check the
connection of the harness.
·
ASM-SENSOR- B
(
4b
)
If the harness connection is normal,
replace
the following:
·
SN2
·
PBA-MAIN
