44
CHECK AND ADJUSTMENT PROCEDURES
:
Groove Position Adjustment
3.10 Groove Position Adjustment
■
The auto-processed groove position can be adjusted toward the front or rear surface of the lens.
1
Check the groove position.
1) Load the circle 45 internal data (see “3.2.2 Loading the shape for adjustment” (page 17))
and in Auto mode, process a lens of a thickness commonly used.
2) Check the groove position of the processed lens.
To move the groove position toward the front or back, adjust the groove position in the following
procedure.
2
Display the menu screen in service mode.
See “3.2.1 Entering service mode” (page 16).
3
Press the Grinding tab on the menu
screen.
The Grinding screen is displayed.
1) Press the Adjustment button.
2) Press the "Groove position" numeric
field.
The numeric field turns orange and the
numeric keypad appears.
3) Change the parameter value.
Enter the value and press the
button with the numeric keypad.
Decrease the value.
⇒
The groove moves toward the front surface.
Increase the value.
⇒
The groove moves toward the rear surface.
Example) To move the groove position toward
the front surface, decrease the value
by 0.50.
4
Press the Exit tab to return to the layout
screen.
5
Repeat Steps
1
to
4
until the groove position becomes proper.
3
1)
1)
2)
2)
Decrease the value.
Increase the value.
Summary of Contents for ME 1200
Page 6: ...IV ...
Page 10: ...2 REQUIREMENTS Requirements ...
Page 58: ...50 CHECK AND ADJUSTMENT PROCEDURES Clock Check ...
