35
CHECK AND ADJUSTMENT PROCEDURES
:
Axis Adjustment
3
4) Press the "Front, Flat" numeric field.
Pressing the numeric field displays the numeric keypad.
5) Change the parameter value with the numeric keypad. Enter the value and press the
button.
When the safety bevel amount of the upper right is larger when viewed from the front surface,
increase the value. When the safety bevel amount of the upper left is larger, decrease the value.
3
Press the Exit tab to return to the layout screen.
4
Repeat Steps
1
to
3
until the safety bevel amount is proper.
5
Perform beveling. Change "Rear, Bevel", "Front, Bevel" in the same manner.
㸩
㸫
Front
surface
The safety bevel amount of the
upper left is larger
The safety bevel amount of the
upper right is larger
Summary of Contents for ME 1200
Page 6: ...IV ...
Page 10: ...2 REQUIREMENTS Requirements ...
Page 58: ...50 CHECK AND ADJUSTMENT PROCEDURES Clock Check ...
