39
CHECK AND ADJUSTMENT PROCEDURES
:
Polishing Adjustment
3
3) Press the Adjustment button.
4) Press the Axis button.
5) Press the "Polish axis" numeric field.
The numeric keypad appears.
6) Change the parameter value with the
numeric keypad. Enter the value and
press the
button.
Example) When viewed from the lens front, the upper left
of the edge remains unpolished.
increase the value.
Example) When viewed from the lens front, the upper right
of the edge remains unpolished.
decrease the value.
3
Press the Exit tab to return to the layout screen.
4
Repeat Steps
1
and
2
until the polishing becomes uniform in circumference.
5
Set the parameter values of "CR39, Flat" of the Polish differential parameter back to their
original values.
3)
3)
4)
4)
5)
5)
The upper left of the edge re-
mains unpolished.
Front
surface
The upper right of the edge
remains unpolished.
Front
surface
Summary of Contents for ME 1200
Page 6: ...IV ...
Page 10: ...2 REQUIREMENTS Requirements ...
Page 58: ...50 CHECK AND ADJUSTMENT PROCEDURES Clock Check ...
