33
CHECK AND ADJUSTMENT PROCEDURES
:
Axis Adjustment
3
1) Press the
button on the lay-
out screen while pressing the
button.
The menu screen in service mode is
displayed.
2) Press the Grinding tab on the menu
screen.
The Grinding screen is displayed.
3) Press the Adjustment button.
4) Press the Axis numeric field.
The numeric keypad appears.
5) Change the parameter value with the
numeric keypad. Enter the value and
press the
button.
Change the parameter value by the shifted axis angle.
When the lens edge is shifted in the upper right direction when viewed from the rear surface,
increase the value.
Example) When lens edge is shifted 1º in the upper right direction, increase the parameter value by
1.00.
6
Press the Exit tab to return to the layout screen.
7
Repeat Steps 1 to 6 until the shifted axis angle becomes ±0.5º.
1
Menu
Menu
2)
2)
3)
3)
4)
4)
Summary of Contents for ME 1200
Page 6: ...IV ...
Page 10: ...2 REQUIREMENTS Requirements ...
Page 58: ...50 CHECK AND ADJUSTMENT PROCEDURES Clock Check ...
