37
CHECK AND ADJUSTMENT PROCEDURES
:
Polishing Adjustment
3
3
Repeat Steps
1
and
2
until no unpolished or burnt portions are left.
4
Process the other lens materials and precisely change the other Polish differential
parameters in the same manner.
3.8.2
One side of beveled edge is left unpolished
■
Check the bevel polished surface of a plastic lens processed with the circle 45 internal data. If one
side of the beveled edge is left unpolished, change the Bevel position (Polish) parameter.
1
Change the Bevel position (Polish) parameter.
1) Display the menu screen in service mode.
See “3.2.1 Entering service mode” (page 16).
2) Press the Grinding tab on the menu
screen.
The Grinding screen is displayed.
3) Press the Adjustment button.
4) Press the "Bevel position" button.
5) Press the Polish numeric field.
The numeric keypad appears.
2)
2)
3)
3)
4)
4)
5)
5)
Summary of Contents for ME 1200
Page 6: ...IV ...
Page 10: ...2 REQUIREMENTS Requirements ...
Page 58: ...50 CHECK AND ADJUSTMENT PROCEDURES Clock Check ...
