23
CHECK AND ADJUSTMENT PROCEDURES
:
Safety Bevel Check and Adjustment
3
5
Load the circle 45 internal shape data.
1) For the circle 45 internal data, see
“3.2.2 Loading the shape for adjust-
ment” (page 17).
2) Process a lens with the settings as
Two Point, Flat, None (polish),
Medium (S.F.B.), and Size 0.0.
3) Measure the front and rear safety
bevel amounts of the processed lens
and check them.
6
Change the parameter corresponding to
the wheel position until the safety bevel
amount becomes ±0.2 mm to the value
set in Step 4 after flat edging.
To increase the safety bevel amount,
increase the value.
To reduce the safety bevel amount,
decrease the value.
7
Check and adjust the bevel including the
bevel position check in the same manner.
8
Press the Exit tab to return to the layout
screen.
6
0.4 mm
0.3 mm
Summary of Contents for ME 1200
Page 6: ...IV ...
Page 10: ...2 REQUIREMENTS Requirements ...
Page 58: ...50 CHECK AND ADJUSTMENT PROCEDURES Clock Check ...
