Nidek Medical LE-9000DX Express, Operator'S Manual

Page: 98 / 153

5 - 9
ޓޓޓޓޓ㧯㧻㧰㧱ޓޓ㧦㧜㧝㧞㧟㧠㧡㧢㧣㧤㧥㧜㧝㧞㧟㧠㧡ޓޓޓޓޓ
ޓ
ޓޓޓޓޓ㧰㧭㨀㧭ޓ㨃㧾㧵㨀㧱ޓ㧦ޓޓ㧿㨀㧭㧾㨀ޓޓޓޓޓޓޓޓޓ
ޓ
ޓ ޓ ޓ ޓ
ޓޓޓޓޓ㧰㧭㨀㧭ޓ㧾㧱㧭㧰ޓޓ㧦ޓޓ㧰㧱㨀㧭ޓ㧿㧱㨀ޓޓޓޓޓޓ
ޓ
ޓ ޓ ޓ ޓ ޓ ޓ ޓ ޓ ޓ
ޓ ޓ ޓ
ޓޓޓޓޓ㧯㧭㧺㧯㧱㧸ޓޓޓޓޓ㧦ޓޓ㧿㧱㧸㧱㧯㨀ޓޓޓޓޓޓޓޓ
ޓ
5.4.2 When the edger is connected to the barcode scanner
By connection of the edger to the optional barcode scanner, the barcode memory function, which
stores traced outline and lens layout data for a maximum of 500 sets of frames, becomes available.
The read barcode number is stored as the registered number of the data. The barcode numbers
allow easy management of frames.
CAUTION
• The barcode memory function cannot be used concurrently with the memory function
with memory addresses of the standard specifications.
• When the instrument is changed from the standard specifications to the barcode
specifications, all the data stored with memory addresses will be erased.
NOTE
• Ensure that the barcode scanner is connected to the connector for the barcode on the
rear panel of the instrument (see p. 3-1).
<Storing method>
1. Read the traced data.
2. Set the parameter “Ext. interface” to “None”.
3. Input lens layout as necessary.
4. Read the corresponding barcode of the
frame to be stored.
The screen will change to the Barcode screen,
and the read barcode will be shown.*
3
5. Press to store the traced outline, lens
layout, lens material, frame type, and the
grinding mode.
After all data have been stored, the Layout
screen will return.
*3 When data is additionally stored with a barcode number whose data has already been stored,
the former data will be erased.