Nidek Medical LE-9000DX Express, Operator'S Manual

Page: 37 / 153

4 - 7
2) Input the height of the optical center.
Align the cursor to and input the
height of the optical center from the rim
center with
or .
*6
3) To correct the finished lens size, align the
cursor to
SIZ
and input the corrective value
with or .
e.g. +1.00: The finished size becomes 1 mm larger in diameter.
The minimum lens diameter required for processing is shown on the top right of the display
at MIN.
NOTE
• This value is provided just for reference purposes. It is recommended to use a lens
which is 2 - 3 mm longer in diameter for cases where the optical center and the center
of the lens are not the same.
[When the mark of the optical center becomes ]
When the layout is input, the mark of the optical
center may change from
to .
indicates that the lens adapter or lens clamp
may be in contact with the processing wheels.
Replace the lens adapter, lens clamp and lens cup
with the ones for half-eye lenses.
See “4.5.3.1 Processing half-eye lenses” (p. 4-45).
*6 It is also possible to input the height of the optical center from the bottom of the lens outline.
See “4.3.2.1 Inputting the height from the lens outline” (p. 4-8).
㧚ޓ
㧚ޓ
ޓ㧚
㧚ޓ
㧹㧵㧺ޓޓ㧢㧢
㧲㧼㧰㧦㧢㧥㧜㧜ޓޓޓޓޓޓޓޓ 㧲㧼㧰㧦㧢㧥㧜㧜ޓޓޓޓޓޓޓޓ
㧼㧰 㧼㧰 ޓ㧦㧢㧞㧜㧜ޓޓޓޓޓޓޓޓ 㧦㧢㧞㧜㧜ޓޓޓޓޓޓޓޓ
ޓޓޓ㧦ޓޓ㧞㧜ޓޓޓޓޓޓޓޓ ޓޓޓ㧦ޓޓ㧞㧜ޓޓޓޓޓޓޓޓ
㧿㧵㨆㧦ޓ㧜㧜㧜ޓޓޓޓޓޓޓޓ 㧿㧵㨆㧦ޓ㧜㧜㧜ޓޓޓޓޓޓޓޓ
㧭㧯㨀ޓޓޓޓޓޓޓޓޓޓޓޓޓ 㧭㧯㨀ޓޓޓޓޓޓޓޓޓޓޓޓޓ
㧹㧱㧹 㧹㧱㧹㧦ޓޓޓޓޓޓޓޓޓ 㧦ޓޓޓޓޓޓޓޓޓ
㧼㧸㧭 㧼㧸㧭㧹㨀㧸㧭㨁㨀ޓޓޓޓޓ 㧹㨀㧸㧭㨁㨀ޓޓޓޓޓ㧾
1)
2)
3)
㧚ޓ
㧚ޓ
ޓ㧚
㧚ޓ
㧹㧵㧺ޓޓ㧢㧢
㧲㧼㧰㧦㧢㧥㧜㧜ޓޓޓޓޓޓޓޓ 㧲㧼㧰㧦㧢㧥㧜㧜ޓޓޓޓޓޓޓޓ
㧼㧰 㧼㧰 ޓ㧦㧢㧞㧜㧜ޓޓޓޓޓޓޓޓ 㧦㧢㧞㧜㧜ޓޓޓޓޓޓޓޓ
ޓޓޓ㧦ޓޓ㧞㧜ޓޓޓޓޓޓޓޓ ޓޓޓ㧦ޓޓ㧞㧜ޓޓޓޓޓޓޓޓ
㧿㧵㨆㧦ޓ㧜㧜㧜ޓޓޓޓޓޓޓޓ 㧿㧵㨆㧦ޓ㧜㧜㧜ޓޓޓޓޓޓޓޓ
㧭㧯㨀ޓޓޓޓޓޓޓޓޓޓޓޓޓ 㧭㧯㨀ޓޓޓޓޓޓޓޓޓޓޓޓޓ
㧹㧱㧹 㧹㧱㧹㧦ޓޓޓޓޓޓޓޓޓ 㧦ޓޓޓޓޓޓޓޓޓ
㧼㧸㧭 㧼㧸㧭㧹㨀㧸㧭㨁㨀ޓޓޓޓޓ 㧹㨀㧸㧭㨁㨀ޓޓޓޓޓ㧾