Nidek Medical LE-9000DX Express, Operator'S Manual

Page: 49 / 153

4 - 19
NOTE
• Be sure to move a glass lens within the roughing wheel for glass lenses.
If the glass lens contacts the other wheels, it may damage the wheels or the glass lens
may crack.
• The adjusted contact position with the wheel is effective only during the roughing of
one lens. After the lens processing is over, the contact position with the wheel will
return to its original position.
• Setting the parameter “Reverse GLS Grind” to “Exec” roughly edges a lens by
automatically changing the position to be contacted with the roughing wheel from side
to side.
B. It is possible to adjust the plastic lens contact position laterally during roughing.
If a sharply-warped or high minus plastic lens is detached from the roughing wheel, change the
position where the plastic lens contacts the roughing wheel.
To adjust the contact position, press or
during roughing.
: The contact position with the wheel
will shift to the right.
: The contact position with the wheel
will shift to the left.
NOTE
• The adjusted contact position with the wheel is effective only during roughing of one
lens. After the lens processing is over, the contact position with the wheel will return
to the original position.
5. Remove the finished lens.
1) Open the soundproof cover.
2) Press and remove the lens.
WARNING
• Open the soundproof cover after making sure that the wheels have stopped completely.
• Release the chuck by pressing after making sure that the wheels have stopped
completely.
If the chuck is released before the wheels have stopped completely, when a lens is
dropped, it may contact the turning wheels and its scattering may cause an injury.
← →
Roughing wheel for plastic lenses