Nidek Medical LE-9000DX Express, Operator'S Manual

Page: 64 / 153

4 - 34
4.5.2.2 EX lens flat (rimless) edging mode
This is the mode to make lens shape measurement of the front surface and to achieve flat edging
of EX lenses with higher accuracy. (In the normal flat edging mode, the lens shape measurement
of EX lenses cannot be made.)
Especially, this mode is effective when polishing is selected to obtain polishing with high accuracy.
NOTE
• Use a lens cup for blocking.
A suction cup cannot hold the convex surface of an EX lens securely enough. It may
move during blocking.
1. Check the processing conditions.
: PNT
: EX
2. Set a lens to the adapter in the processing unit.
See Step 2 of “4.6.1.1 Auto processing mode”.
3. Close the soundproof cover.
Processing does not start even if is pressed unless the soundproof cover is closed.
WARNING
• Be sure to keep the soundproof cover closed while processing a lens.
If the soundproof cover is opened during processing, the instrument will not stop.
Spray including processing waste may damage your eyes.
㧲㧼㧰㧦㧢㧥㧜㧜ޓޓޓޓޓޓޓޓ 㧲㧼㧰㧦㧢㧥㧜㧜ޓޓޓޓޓޓޓޓ
㧼㧰 㧼㧰ޓ㧦㧢㧞㧜㧜ޓޓޓޓޓޓޓޓ 㧦㧢㧞㧜㧜ޓޓޓޓޓޓޓޓ
ޓޓޓ㧦ޓޓ㧞㧜ޓޓޓޓޓޓޓޓ ޓޓޓ㧦ޓޓ㧞㧜ޓޓޓޓޓޓޓޓ
㧿㧵㨆㧦ޓ㧜㧜㧜ޓޓޓޓޓޓޓޓ 㧿㧵㨆㧦ޓ㧜㧜㧜ޓޓޓޓޓޓޓޓ
㧭㧯㨀ޓޓޓޓޓޓޓޓޓޓޓޓޓ 㧭㧯㨀ޓޓޓޓޓޓޓޓޓޓޓޓޓ
㧹㧱㧹 㧹㧱㧹㧦ޓޓޓޓޓޓޓޓޓ 㧦ޓޓޓޓޓޓޓޓޓ
㧼㧯 㧼㧯㧼㧺㨀 㧼㧺㨀㧱㨄ޓޓޓޓޓޓޓ 㧱㨄ޓޓޓޓޓޓޓ㧾
㧚ޓ
㧚ޓ
ޓ㧚
㧚ޓ
㧹㧵㧺ޓޓ㧢㧡