Nidek Medical LE-9000DX Express, Operator'S Manual

Page: 34 / 153

4 - 4
4.3 Layouts
Traced data needs to be transmitted and read since the LE-9000EX Express/LE-9000DX Express
does not contain a tracer (see the Operator’s Manual of the connected device for the reading
method of traced data).
Depending on the connected device, layout data is input into the LE-9000EX Express/LE-9000DX
Express, or layout data is input into the ICE-2000, LT-800SX or other devices and read with the
traced data.
4.3.1 Inputting layout data into the ICE-2000 or LT-800SX
See the Operator’s Manual of the ICE-2000 or LT-800SX for inputting layout data and transmitting
it.
* The processing mode cannot be specified on the ICE-2000 and LT-800SX. Specify the
processing mode (Auto, Guided, EX, Blank) on the LE-9000EX Express/LE-9000DX Express
(See p. 4-5).
* The safety bevel size cannot be specified on the LE-9000EX Express. Safety bevels of the
same size will be made even if the chamfering mode (Small, Middle, Large, Special) is
specified. (Chamfering cannot be performed by the LE-9000DX Express.)
4.3.2 Inputting layout data into the LE-9000EX Express/
LE-9000DX Express
1. Read the traced data.
The reading method of data depends on the connected devices. See the Operator’s Manual of
the connected device.
e.g.:
When the LT-900 and LE-9000EX Express/LE-9000 DX Express are connected one to one
(interface format: STD), press
for about 2 seconds.
2. Select processing conditions.
1) Specify the material of a lens with .
[PLA (plastic), HPL
*1
(high index plastic),
PC (polycarbonate), GLS *2 (glass), ACR
(acrylic resin) or TRX (trivex)
*3
]
*1 Select HPL when processing plastic lenses which produce burrs and chips easily.
*2 Glass lenses cannot be processed with Type PLB.
*3 To process lenses that melt easily from heat such as a trivex lens, select “TRX”.
㧚ޓ
ޓ
ޓ㧚
㧚ޓ
㧲㧼㧰㧦㧢㧥㧜㧜ޓޓޓޓޓޓޓޓ 㧲㧼㧰㧦㧢㧥㧜㧜ޓޓޓޓޓޓޓޓ
㧼㧰 㧼㧰 ޓ㧦ޓޓޓޓޓޓޓޓ 㧦ޓޓޓޓޓޓޓޓ
ޓޓޓ㧦ޓޓ㧞㧜ޓޓޓޓޓޓޓޓ ޓޓޓ㧦ޓޓ㧞㧜ޓޓޓޓޓޓޓޓ
㧿㧵㨆㧦ޓ㧜㧜㧜ޓޓޓޓޓޓޓޓ 㧿㧵㨆㧦ޓ㧜㧜㧜ޓޓޓޓޓޓޓޓ
㧭㧯㨀ޓޓޓޓޓޓޓޓޓޓޓޓޓ 㧭㧯㨀ޓޓޓޓޓޓޓޓޓޓޓޓޓ
㧹㧱㧹 㧹㧱㧹㧦ޓޓޓޓޓޓޓޓޓ 㧦ޓޓޓޓޓޓޓޓޓ
㧼㧸㧭 㧼㧸㧭㧹㨀㧸㧭㨁㨀ޓ 㧹㨀㧸㧭㨁㨀ޓ ޓ㧾 ޓ㧾
1) 2) 3) 4)