Nidek Medical LE-9000DX Express, Operator'S Manual

Page: 10 / 153

2 - 2
CAUTION
• Never disassemble nor touch the internal structure.
An electric shock or a failure of the instrument may occur.
• Never yank the power cord to disconnect it from the wall outlet but hold the plug.
This can damage the metal core of the cord and may result in a fire, a short circuit or an
electric shock.
• If the wires inside of cables are exposed, the power turns ON or OFF by moving the
power cord, or the cord or plug becomes too hot to hold it, disconnect the power cord
from the wall outlet and contact your authorized distributor.
Otherwise, an electric shock or a fire may occur.
• Do not crush or squeeze the power cord with heavy objects such as the instrument.
Damage to the cord may result in a fire or an electric shock.
• Every once in a while, clean the prongs of the power plug with a dry cloth.
If dust settles thickly on them, they will become damp, and may cause a short circuit or
a fire.
• Plug the power cord correctly until its prongs are fully inserted into the socket.
If the instrument is used with an insecure connection, a fire may occur.
• In the event that the instrument gives off smoke, or a strange smell, etc., turn OFF the
power and unplug the power cord. After the smoke stops coming out of the instrument,
contact your authorized distributor.
If the instrument, which has this kind of abnormal condition, is used, a fire or an electric
shock may occur. In case of fire, use a powder (ABC) extinguisher.
• If the instrument detects any abnormal condition during use, the error code will be shown
on the display panel and the instrument will stop.
Turn the power switch OFF after confirming the error code.
• Be sure to select the correct lens material .
If the wrong material is selected, the lens may break or the lifetime of the processing
wheel may be reduced.
• Be sure to chamfer the front edge and rear edge of a glass lens after processing.
Subtle burrs may damage one’s skin.