Nidek Medical LE-9000DX Express, Operator'S Manual

Page: 53 / 153

4 - 23
9. Start processing.
Press .
Roughing
↓
Finishing
↓
Polishing (Only when is selected with Type PLB or PLB-2R.)
↓
Chamfering (Only when is selected.)(LE-9000EX Express only)
↓
Processings are complete. [The Layout screen returns.]
10. Remove the lens.
WARNING
• Open the soundproof cover after making sure that the wheels have stopped completely.
• Release the chuck by pressing after making sure that the wheels have stopped
completely.
When the chuck is released before the wheels have stopped completely, if a lens is
dropped, it may contact the turning wheels and its scattering may cause an injury.
• It is also possible to switch the processing mode to the guided processing mode even in the
middle of auto processing.
To do so, press
while the roughing is being processed.
After roughing is completed, the instrument goes into the guided processing mode and stops
temporarily.
• While the Simulation screen is presented, it can be changed to the Layout screen by pressing
. The Layout screen here, however, is just a reminder and its data cannot be changed.
(The switches except for do not function.)
Pressing again will return to the Simulation screen, but once processing has started, the
screen cannot be changed any more.