manualshive.com logo in svg

Nidek Medical LE-9000DX Express, Operator'S Manual

The Nidek Medical LE-9000DX Express is a top-of-the-line automated lens edger. For a comprehensive guide on how to operate this high-quality machine, simply download the free Operator's Manual from our website. Ensure you have the necessary information and instructions at your fingertips for optimal use of this cutting-edge device.

Share
Download
background image

8.7 Adjusting the Bevel Position ................................................................................... 8-14
8.8 Adjusting the Axis Shift ........................................................................................... 8-16

8.8.1 Adjusting the axis shift for unpolished lenses ................................................ 8-16

8.9 Adjusting the Lens Margin Allowed for Finishing .................................................. 8-18
8.10 PD Adjustment ...................................................................................................... 8-19
8.11 Adjustment for Polishing ....................................................................................... 8-20

8.11.1 If part of an edge is left unpolished (Types PL4, PLB and PLB-2R) ............ 8-20
8.11.2 If the front edge or rear edge is left unpolished (Types PLB and PLB-2R) .. 8-23
8.11.3 Axis shift adjustment for polished lenses (Types PL4, PLB and PLB-2R) ... 8-24

8.12 Adjustment for Grooving (LE-9000EX Express only) .......................................... 8-26

8.12.1 Setting the initial value for depth and width (LE-9000EX Express only) .... 8-26
8.12.2 Adjusting the groove position (LE-9000EX Express only) .......................... 8-27
8.12.3 Adjusting the groove depth (LE-9000EX Express only) .............................. 8-28

8.12.3.1 Groove depth is not made as designated (LE-9000EX Express only)8-28
8.12.3.2 Groove depth is not even (LE-9000EX Express only) ..................... 8-29

8.13 Adjustment for Chamfering (LE-9000EX Express only) ....................................... 8-31

8.13.1 Setting the SFB mode and chamfering amount (LE-9000EX Express only) . 8-31
8.13.2 Adjusting the chamfering amount (LE-9000EX Express only) ..................... 8-32

8.13.2.1 Safety bevel is not made as designated (LE-9000EX Express only) 8-32
8.13.2.2 Chamfering amount is not even ........................................................ 8-34

8.14 List of Consumable Articles .................................................................................. 8-35

§9

SPECIFICATIONS ....................................................................................................... 9-1

§10

ACCESSORIES .......................................................................................................... 10-1

10.1 NIDEK-type Accessories ...................................................................................... 10-1
10.2 WECO-type Accessories ...................................................................................... 10-1
10.3 SANTI-type Accessories ...................................................................................... 10-2

APPENDIX A. SUPPLEMENT .............................................................................................. A-1

A.1 Selection of Layout ................................................................................................. A-1
A.2 Selection of Blocking .............................................................................................. A-2
A.3 Selection of Processing ........................................................................................... A-3

APPENDIX B. ERROR CODE .............................................................................................. B-1

APPENDIX C. GLOSSARY ................................................................................................... C-1

INDEX ............................................................................................................. End of this manual

Page

Summary of Contents for LE-9000DX Express


























































































































































Reviews:

No comments

Related manuals for LE-9000DX Express

Aircap TRIM-ALL 618 Operator'S Manual preview
TRIM-ALL 618
Brand: Aircap Pages: 8
Stihl FB 131 Instruction Manual preview
FB 131
Brand: Stihl Pages: 80
GreenWorks GE 080 Owner'S Manual preview
GE 080
Brand: GreenWorks Pages: 68

Brands by name

Popular brands

Load more brands