Nidek Medical LE-9000DX Express, Operator'S Manual

Page: 48 / 153

4 - 18
CAUTION
• Be careful not to get your fingers caught when chucking (fixing) a lens.
3. Close the soundproof cover.
Processing does not start even if is pressed unless the soundproof cover is closed.
WARNING
• Be sure to keep the soundproof cover closed while processing a lens.
If the soundproof cover is opened during processing, the instrument will not stop.
Spray including processing waste may damage your eyes.
4. Start processing.
Press .
Lens shape measurement
↓
Roughing
[The screen changes to the Bevel
simulation screen.]
↓
Finishing
↓
Polishing (Only when is selected with Type PLB or PLB-2R.)
↓
Chamfering (Only when is selected.)(LE-9000EX Express only)
↓
Processings are complete. [The Layout screen returns.]
When the screen changes to the Bevel simulation screen in Step , the sectional view position
line rotates along the traced outline, and the bevel section at that position will be shown.
A. The glass lens contact position during roughing can be moved laterally (except for Type
PLB).
By changing the position where the glass lens contacts the roughing wheel, the partial wear of
the roughing wheel for glass lenses will be unlikely to occur.
To adjust the contact position, press or
during roughing.
: The contact position with the wheel
will shift to the right.
: The contact position with the wheel
will shift to the left.
ޓ
ޓ
ޓ
ޓ㧚
ޓ㧚
ޓ㧚
㧮%48 %48㧦㧭ޓ㧡㧜 㧦㧭ޓ㧡㧜
㧼㧺㨀㧦ޓޓ㧜㧜ޓޓޓޓޓޓޓޓ 㧼㧺㨀㧦ޓޓ㧜㧜ޓޓޓޓޓޓޓޓ
ޓ
㧲%48 %48㧦ޓޓ㧡㧜ޓޓޓޓޓޓޓ㧾 㧦ޓޓ㧡㧜ޓޓޓޓޓޓޓ㧾
Bevel section
Sectional view position line
→
←
Roughing wheel for glass lenses