Nidek Medical LE-9000DX Express, Operator'S Manual

Page: 104 / 153

8 - 3
[Dressing the polishing wheel]
1) Press .
Water will run for a few seconds, and at the same time, wheels will begin to turn.
2) Wet the dressing stick well with running water.
3) Press to stop the water.
4) Apply the dressing stick gently to the turning wheel.
Keep applying it for a few seconds.
5) Press .
Water will run to clean the wheel.
6) Repeat Steps 2) - 5) four or five times.
7) Press .
Running water will stop and the turning wheels will stop as well.
CAUTION
• After is pressed, applying the dressing stick to the polishing wheel which is
turning by the force of inertia will damage the wheel and normal processing will not be
able to be performed.
• The dressing of the polishing wheel is intended to make the wheel surface smooth.
Gently apply the dressing stick so as not to scratch or streak the wheel surface.
NOTE
• Soak the dressing stick for the polishing wheel in water 10 minutes prior to dressing
the wheel.