Nidek Medical LE-9000DX Express, Operator'S Manual

Page: 45 / 153

4 - 15
4.5 Processings
The processing mode is specified with and .
See Step 2 of “4.3.2 Inputting layout data into the LE-9000EX Express/LE-9000DX Express”
(p. 4-4).
To turn ON the SFB mode, press . (LE-9000EX Express only)
In addition, the edge will be polished by pressing with Type PL4, PLB, or PLB-2R. (This
function is available only for flat edging with Type PL4.)
4.5.1 Beveling
For beveling, select the optimum processing mode suited to the lens material.
: Optimum mode, { : Recommended mode
*7 Specify the ratio, following the reference ratios below.
• Low power plus monofocal lens
⇒
5 : 5
• Middle and high power plus monofocal lens, Low power minus monofocal lens
⇒
4 : 6 or 5: 5
• Medium power minus monofocal lens
⇒
3 : 7 or 4 : 6
• High power minus monofocal lens
⇒
3 : 7
*
7
Processing mode
Type of lens CRV FRNT REAR RATIO
◎ ◎ ○
Progressive power
◎ ◎
Bifocal
◎ ◎
Cataract
◎ ○
EX
◎
EX AUT
GUI
Special lenses
Monofocal lens
setting setting
Auto processing mode (see p. 4-17) MTL/CEL (ZYL) AUT
Guided processing mode (see p. 4-20) MTL/CEL (ZYL) GUI
EX lens processing mode (see p. 4-27) MTL/CEL (ZYL) EX
Flat (
ｒ
imless) edging mode (see p. 4-31) PNT/NYL (blank)
EX lens flat (rimless) edging mode (see p. 4-34) PNT EX
Auto grooving mode (see p. 4-36) (LE-9000EX Express only) NYL AUT
Guided grooving mode (see p. 4-38) (LE-9000EX Express only) NYL GUI
EX lens grooving mode (see p. 4-42) (LE-9000EX Express only) NYL EX
Processing mode
Flat edging
Beveling