Nidek Medical LE-9000DX Express, Operator'S Manual

Page: 63 / 153

4 - 33
[Addition of grooving](LE-9000EX Express only)
When the parameter “To add safety bevel” is set to “Exec”, grooving can be additionally performed
(except for glass lenses) after the flat edging with the frame setting “NYL”.
However, as well as retouching, this cannot be performed such as when removing the suction
cup, switching R/L, or reading other frame data.
1) Select “AUT” or “GUI” with .
2) Set a lens to the adapter in the processing
unit.
Align the top mark (
•
) on the suction cup
with that of the adapter and insert the suction
cup firmly.
3) Press or .
⇒ ⇒
⇒ ⇒ ⇒
Grooving is performed.
⇒ ⇒
⇒ ⇒ ⇒
After retouching, grooving is performed.
If “GUI” has been selected in Step 1), the screen will change to the Simulation screen and
stop temporarily. Check the groove section and adjust the depth and width, etc. as necessary.
Then, press to start grooving. See “4.5.2.4 Guided grooving mode”.
NOTE
• If grooving has been performed in the first processing, retouching of the groove can be
performed by the same procedure. If “GUI” is selected, any items on the Simulation
screen can be changed for additional grooving. If the groove which has been already
made is retouched, however, only the depth and width can be changed to a larger size.
• If the
SIZ
value is changed with , additional grooving and retouching of the groove
cannot be performed.
㧲㧼㧰㧦㧢㧥㧜㧜ޓޓޓޓޓޓޓޓ 㧲㧼㧰㧦㧢㧥㧜㧜ޓޓޓޓޓޓޓޓ
㧼㧰 㧼㧰ޓ㧦㧢㧞㧜㧜ޓޓޓޓޓޓޓޓ 㧦㧢㧞㧜㧜ޓޓޓޓޓޓޓޓ
ޓޓޓ㧦ޓޓ㧞㧜ޓޓޓޓޓޓޓޓ ޓޓޓ㧦ޓޓ㧞㧜ޓޓޓޓޓޓޓޓ
㧿㧵㨆 㧿㧵㨆 㧦ޓ㧜㧜㧜ޓޓޓޓޓޓޓޓ 㧦ޓ㧜㧜㧜ޓޓޓޓޓޓޓޓ
㧭㧯㨀ޓޓޓޓޓޓޓޓޓޓޓޓޓ 㧭㧯㨀ޓޓޓޓޓޓޓޓޓޓޓޓޓ
㧹㧱㧹 㧹㧱㧹㧦ޓޓޓޓޓޓޓޓޓ 㧦ޓޓޓޓޓޓޓޓޓ
㧼㧸㧭 㧼㧸㧭㧺㨅㧸㧭㨁㨀ޓޓޓޓޓ 㧺㨅㧸㧭㨁㨀ޓޓޓޓޓ 㧾
㧚ޓ
㧚ޓ
ޓ㧚
㧚ޓ
㧹㧵㧺ޓޓ㧢㧡