New Holland T6010 DELTA, Operator'S Manual

Page: 339 / 412

SECTION 4 -- LUBRICATION AND MAINTENANCE
4--59
Cab roof mounted worklamps
Remove the two retaining screws (1) and lower the
lamp assembly from the roof. Rotate the bulb holder
counter--clockwise and pull from the lamp
housing.Rotate the bulb counterclockwise and
remove from the bulb holder making sure to use a
clean cloth or a tissue.
121
Turn/Position Lights
To gain access to the lower rear turn/position bulbs
remove the two retaining screws. Remove the lens.
To remove the bulbs (1) rotate counter clockwise.
122
The front turn/position lamps are located on the
grabrails. Remove the two retaining screws.Remove
the lens. To remove the turn indicator bulb (1) or the
position bulb (3) rotate counter clockwise. When
re--fitting the lens ensure the sealing rubber (2) is
fully seated in the lamp housing.
123
Turn/Position Lights with Standard Cab
(North America Only)
The turn position lamps (Front and Rear) are located
in the cab roof. Remove the two retaining bolts (1)
and pull the lamp assembly from the housing. Rotate
the harness connector counter--clockwise to remove
the bulb holder from the lamp housing.
124