New Holland T6010 DELTA, Operator'S Manual, Page: 228 / 412

SECTION 3 -- FIELD OPERATION
3--94
It may be desirable to allow equipment such as
ploughs etc., to sway from side to side.
If the pin is removed from the front hole, the front end
(1) of the stabiliser will be allowed to telescope and
a limited degree of sway will be permitted. The pin
should be re-inserted through the central hole, as
shown at (3) in Figure 161.
When the front of the stabiliser is attached to the
upper
hole (2) in the front mounting bracket the
stabilisers will allow the implement to sway in work
with reduced sway when the implement is raised.
This feature provides greater implement control
when turning on the headlands of a field.
IMPORTANT: When setting the stabiliser length,
particularly if using the sway facility, ensure that
there is no possibility of the rear tyres fouling the
stabilisers or lower links.
3
1
2
162