New Holland T6010 DELTA, Operator'S Manual

Page: 54 / 412

SECTION 2 -- CONTROLS, INSTRUMENTS AND OPERATION
2--26
Deluxe Mechanical Seat (where fitted)
Lift the travel adjustment lever (1) and move the seat
forward or backward, as required. The seat will lock
in position when the lever is released.
There is a knurled wheel (2) on the underside of each
armrest. Turn the wheel to alter the angle of the
armrest.
If not required, both armrests may be lifted to the
vertical position.
The backrest may be tilted to suit the operator. Lift
the lever (3) on the left-hand side of the seat frame
and adjust the inclination of the backrest.
To facilitate observation of an implement attached to
the rear of the tractor, the seat may be allowed to
swivel. Adjustment is available as follows:
(a) Lock in one position 10
°
to the left of centre.
(b) Lock in one of two positions at 10
°
and 20
°
, to the
right of centre.
Lift the lever (4) and rotate the seat, as required. The
seat will lock in position when the lever is released.
46
Turn the crank handle (1) to adjust the suspension
until your approximate weight, in kilos, is indicated in
the window (2). Turn the handle clockwise to
increase suspension stiffness to suit a heavier
operator and provide a firmer ride. Turn the handle
anti-clockwise and the seat suspension will become
softer.
The seat height is adjustable in three positions. With
the seat in the lowest position, grasp either side of the
seat cushion and lift the seat bodily until it locks in the
intermediate position. Lift the seat further and it will
lock in the maximum height position. To lower the
seat, lift the seat bodily to the fullest extent, to trip the
mechanism, then allow the seat to lower.
A storage pouch is provided on the back of the seat.
47