New Holland T6010 DELTA, Operator'S Manual

Page: 194 / 412

SECTION 3 -- FIELD OPERATION
3--60
Joystick Control (where fitted)
The joystick (1), actuates valves
I
and
II
, operating
in a cross pattern.
Moving the joystick backwards and forwards in a
straight line actuates valve No.
I.
Moving the joystick sideways in a straight line
actuates valve No. II.
Moving the joystick diagonally will actuate both
valves simultaneously. By applying directional bias,
one valve can be made to actuate at a faster or
slower rate than the other.
Move the joystick rearward from the neutral position
and the cylinder connected to valve No. I will extend
to raise the implement. Push the joystick forward,
past neutral, to retract (lower) the cylinder. Pushing
it fully forward, beyond the ‘retract’ position, will
select ‘float’ which will permit the cylinder connected
to remote control valve No.
I
to extend or retract
freely, thereby allowing equipment such as scraper
blades to ‘float or follow the ground contour.
Move the joystick to the left from the neutral position
and the cylinder connected to valve No.
II
will extend
to raise the implement. Move the joystick to the right,
past neutral, to retract the cylinder. Move the it fully
to the right, beyond the ‘retract’ position, will select
‘float’ which will permit the cylinder connected to
remote control valve No. II to extend or retract freely.
The joystick and it’s respective valves are colour
coded for identification.
105