New Holland T6010 DELTA, Operator'S Manual

Page: 212 / 412

SECTION 3 -- FIELD OPERATION
3--78
Connecting Single-Acting Cylinders
Connect the hose from a single-acting cylinder to the
extend (left--hand) coupler on the remote control
valve, as previously described.
To extend a single-acting cylinder, pull the control
lever back to the extend position (R).
Manually return the lever to the neutral position to
stop the cylinder when it has reached the desired
position. (see page 3--75).
To retract a single-acting cylinder, move the lever
fully forward to the float (F) position.
NOTE: In single acting timer mode the remote lever
will lock in the extend position and will not
automatically return to the neutral position.
IMPORTANT: Always use the “float” position to
lower a single-acting cylinder. The “retract” position
is for double-acting cylinders only.
134
Connecting Double-Acting Cylinders
Connect the feed hose from a double-acting cylinder
to the left--hand coupler (1) on the remote control
valve and the return hose to the right--hand coupler
(2), as previously described. To extend a double-act-
ing cylinder, pull the control lever back to the extend
position.
To retract a double-acting cylinder, push the control
lever forward past neutral to the retract position.
Further forward movement of the lever will select
float which will allow the cylinder to extend or retract
freely. This feature is very helpful when carrying out
work with equipment such as scraper blades and
loaders.
NOTE: To prevent cylinders creeping under load,
always connect the hose from the load supporting
side of the cylinder to the left--hand coupler.
135