New Holland T6010 DELTA, Operator'S Manual

Page: 63 / 412

SECTION 2 -- CONTROLS, INSTRUMENTS AND OPERATION
2--35
Multi-function Switch
The stalk-type switch is mounted on the left-hand
side of the steering column. The switch controls the
tractor lights, horn and turn signals.
The centre of the stalk switch rotates. With reference
to Figure 64, turn the switch away from you, to
position 1, to turn on the instrument and position
lights. Turn the switch to position 2 to select the
headlights.
With the headlights on, push the stalk away from you,
position 3, to change from dipped to high beam. Pull
the stalk toward you, position 4, to change back to
dipped beam. With high beam selected, the blue
indicator light on the instrument panel is illuminated.
64
With the headlights off, pull the stalk towards you,
position 5, against spring pressure, to flash the
headlight high beam. The stalk will return to the
central position when released.
Move the stalk to position 6 to operate the right turn
signals, position 7 will activate the left turn signals.
Indicator lights on the instrument panel will also flash
when the turn signals are actuated. A warning buzzer
will sound if the indicators are not cancelled within 20
seconds.
NOTE: The turn signals will only operate with the
key-start switch turned on.
Press in the end of the stalk, position 8, to sound the
horn.
65
Hazard Warning Lights Switch
Press the left-hand side of the switch (1) to operate
all the turn signals simultaneously. The switch will
flash with the turn signals.
66