Netscout OneTouch AT 10G, User Manual

Page: 57 / 248

Chapter 3: Basic Operation
Run AutoTest
55
You can capture traffic to and from the analyzer during AutoTest.
See “AutoTest Capture” on
page 207 .
Icons Indicate Test Status
When AutoTest begins, the AutoTest button changes to a
stop button . Tap the stop button if you want to stop AutoTest
before it completes. You can also stop AutoTest by pressing the
AutoTest key

.
As AutoTest runs, each user test icon changes to indicate its
status.
The test has not started. The icon is faded.
The test is in progress.
The test passed.
The test failed.
The Connect (TCP) test is complete when its icon is marked with
the green check mark to indicate it passed, or the red X to
indicate it failed.
The shortcut bar’s background is black until AutoTest completes.
When AutoTest completes the shortcut bar’s background turns
green if all tests pass, or red if
any
test fails.