Netscout OneTouch AT 10G, User Manual

Page: 174 / 248

OneTouch AT 10G
User Manual
172
Test Settings
The following test settings can be configured via the TOOLS
screen. Refer to the following pages.
“Wired” on page 172
“SNMP” on page 146
“Slow Discovery” on page 147. Also included in this section:
“View or Change the analyzer’s MAC Addresses” on page 174
Wired
On the HOME screen, tap TOOLS , then tap the Wired button
to access the wired settings.
Speed and Duplex
Choose a link speed and a duplex mode. Auto (Autonegotiation)
is recommended in most circumstances. However, you can force
Speed and Duplex settings if desired.
802.1X
Tap the 802.1X button to open the SECURITY screen. Enable
802.1X authentication by setting Enable to On .
EAP - Select an EAP type that is appropriate for your
authentication server.
If necessary for your selected EAP type, enter the User name
(login name) and Password .
Alternate ID - The Alternate ID can be used with certain EAP
methods to send an empty or anonymous identity in plain text
while establishing a private connection. Once privacy is
established, the analyzer sends the real identity (specified using
the User and Password buttons) within the secure tunnel.
Alternate ID is analogous to Microsoft Windows Identity Privacy.
The Alternate ID can also be used for routing to an
authentication server in a different realm. In this case, the