Netscout OneTouch AT 10G, User Manual

Page: 46 / 248

OneTouch AT 10G
User Manual
44
If a static IP address is required
If your network requires you to assign a static IP address for the
OneTouch analyzer’s management port:
1
From the HOME screen, tap the TOOLS icon .
2
Scroll down to the Maintenance Tools section, and tap the
Management Port button.
3
Tap the Wired button.
4
Tap STATIC on the Address button and set the address.
Selecting a Registration Account
When registering the analyzer, you can link the analyzer to an
existing NETSCOUT account or to a new account that you create.
Follow the analyzer’s on-screen instructions.
Your registered OneTouch AT is shown in the Registered Products
section of your account on www.enterprise.netscout.com.
Note
The OneTouch Platform (see “OneTouch Platform” on
page 20
) is registered as one product, and the
OneTouch AT 10G module is registered as a separate
product.