Netscout OneTouch AT 10G, User Manual

Page: 132 / 248

OneTouch AT 10G
User Manual
130
Video (RTSP) Test
Purpose
The Video (RTSP) test verifies the ability to access video content
from on-demand streaming media servers. The test uses the RTSP
protocol to establish and play the designated video file from the
specified RTSP Server. The target server can be an IPv4 address,
IPv6 address or named server. The test verifies the ability to
playback the specified media file from the server using the
designated Port.
Configuration
Server - Enter the URL or the IP address of the target server. See
also: “Server” on page 84 .
The Name button allows you to assign a custom name to the test.
See also: “Name” on page 84 .
Transfer Size and Time Limit - The test will end when the selected
Transfer Size has been streamed or when the time limit has been
reached.
 If the Transfer Size has been streamed before the Time Limit is
reached, the test will pass.

If the Transfer Size has not been streamed before the Time
Limit is reached, the test will fail.

If the Transfer Size is All , the test will run until the time limit is
reached or until the entire stream is received, and the test will
pass.

If the stream is interrupted, the test will fail.
Port specifies the port on which RTSP communication will be
established. RTP is automatically set up using port 1386 for Data
and 1387 for Control.
File is the name of the file that will be received (streamed).