Netscout OneTouch AT 10G, User Manual

Page: 28 / 248

OneTouch AT 10G
User Manual
26
GVO008.EPS
Figure 7. Top End View - Connectors
 Fiber Port (SFP / SFP+ receptacle)
 Wired Ethernet Port (RJ-45 connector)
The OneTouch AT 10G analyzer has two ports used for network
testing:
 10/100/1000M RJ-45 Ethernet connector (for copper
connection)
 1000M and 10G standard SFP+ socket (for fiber
connection)
To connect to a network using a copper cable, make a connection
to the RJ-45 port.
To connect to a network using optical fiber, insert the
appropriate SFP+ adapter into the analyzer’s SFP+ port. Then
make a fiber connection from the network to the SFP+ adapter.
The OneTouch analyzer supports 100BASE-FX and 1000BASE-X
SFP+ adapters.
The analyzer links when you tap the AutoTest button or
press the AutoTest

key.
If the analyzer is connected to the network using both the
Ethernet and fiber ports, the analyzer will use the fiber port.

