Netscout OneTouch AT 10G, User Manual

Page: 180 / 248

OneTouch AT 10G
User Manual
178
Testing Tools
The following testing tools are available on the TOOLS screen.
Capture
See “Packet Capture” on page 201 .
Performance Peer
This tool is used when running Wired Performance tests that
require two devices - the source OneTouch AT 10G and either a
peer or reflector. This tool is used when designating this device to
be the peer.
See “1G Wired Performance Test (RFC 2544)” on page 101 and
“10G Wired Performance Test (Y.1564)” on page 116 for more
information.
Browser
The OneTouch AT 10G analyzer’s web browser and SSH allow you
to perform tasks such as verifying and changing switch
provisioning, accessing technical information on the web, and
closing trouble tickets in help desk portals. To access the web
browser or the SSH client:
1 Establish a wired Ethernet connection to your network. You
can use the network test ports (RJ-45 or Fiber) or the
management ports.
2 On the HOME screen, tap TOOLS .
3 In the Testing Tools section, tap Browser .
4 Use the Web Server button to specify the target server.
5 Select the port you want to use for the browser connection.
6 Set Mobile to On to advertise to the web server that you are
on a mobile device. If available, you will receive content
formatted for the smaller screens of mobile devices.