Netscout OneTouch AT 10G, User Manual

Page: 152 / 248

OneTouch AT 10G
User Manual
150
Note
Wi-Fi infrastructure devices are discovered via their
wired network connections. Wi-Fi devices in the
broadcast domain are discovered through Link Layer
and Network Layer discovery techniques.
The information displayed on device buttons changes based on
the sort key.
For example, when devices are sorted based on IP address, the IP
address is displayed in bold characters, the best name is shown
below the IP address, and the MAC address is shown on the right.
When devices are sorted based on “Top Broadcast” the per-
centage of broadcasts sent by the device is shown in bold text,
the best name is shown below that, and the manufacturer
MAC is shown on the right side of each device button.
The sort key is displayed on the device buttons in a bold font.
If a problem is detected a warning icon is shown on the
right. Tap the button to show detailed information.

The status bar is displayed on all WIRED ANALYSIS screens. It
shows the number of hosts, access devices, and servers found. It
also shows the total number of devices discovered.

The currently selected sort key is displayed above the SORT
button .

The SORT button lets you sort the list of hosts, access
devices, servers, or all devices. See “Wired Device Sorts” on
page 153 .

The Sort Order button determines whether the sorted results
are shown in ascending
or descending order.

The REFRESH button clears all wired analysis results and
restarts wired analysis.