Netscout OneTouch AT 10G, User Manual

Page: 102 / 248

OneTouch AT 10G
User Manual
100
Data Start time is measured from when the port was opened until
the first file data was received.
Data Transfer is the amount of time it took to receive the data
from the target server.
Total Time is the end user response time (EURT), which includes
DNS lookup time, TCP connect time, Data Start time, and the time
it took to upload/download the specified amount of data to/from
the target server.
Data Bytes is the total number of data bytes transferred.
Rate is the measured bit rate, based on frames sent or received.
A ping test runs simultaneously with the FTP test. If the FTP test
finishes before the ICMP echo reply packet arrives, dashes will be
displayed for the ping test results. Ping results do not affect the
Pass/Fail status of the test.
Return Code specifies the end-of-test status or an error condition
if encountered.
Below the Return Code, the target server addresses are displayed.
If you specified a target server’s URL, these addresses were
supplied by DNS servers.
At the bottom-left corner of the screen, an icon indicates the
test’s status:
A progress spinner indicates the test is in progress.
A green check mark indicates the test passed.
A red x indicates the test failed.
Tap the TEST AGAIN button to re-run the test. Tap the
TOOLS button to run path analysis to the target server,
launch a browser against the target server, or Telnet/SSH to the
server.